Sockets
 1/4" Magnetic Hex Socket
5/16" Magnetic Hex Socket
3/8" Magnetic Hex Socket
#2 Phillips Drive Socket
Touch-Up Paint, Pint
Available in all standard colors.
 Rust Inhibiting Metal Coating
Red Primer - 5 Gallons
Red Primer - 1 Gallon
Red Primer - 23 oz. Spray
 Wiss Aviation Tin Snips
"Straight Cut"
"Right Cut"
"Left Cut"
 Tenryu Steel-Pro Cutting Blade
 Fits 7-1/4" circular saws. Good for cutting sheet steel, metal studs, steel pipe, channel and other mild steel.
Sheeter Drill Bits
1/8", 3/16", 5/16", 3/8", 1/2", 9/16"
 Non-Slip Panel Protector
Available in 2' x 60' rolls or by the foot.  7-1/4" Metal Cutting Blade
Fits all 7-1/4" circular saws. Used cutting flat and corrugated sheet steel and bar stock.
14" Abrasive Cutting Blade
 Fits all 14" chop saws with 1"arbor. Cuts structural metal, angle iron and other ferrous metals.
|
Vice Grip Sheet Metal Tool
 3-1/8" width locking jaws.
Excellent for trim fabrication.
Vice Grip Locking C-Clamp
Hemming Tool
Truck Ratchet Tie Downs
2" x 50' 10,000# web.
RETRO-EASE
An Innovative Way to Re-Roof Existing Buildings Avoiding Danger, Expense and Hassle.
Easily applied over existing composition roofs, Retro-Ease foam strips mount directly onto shingles for installation of any metal roof profile. Eliminate the hassles of wood firring while preventing many on-sight retrofit problems. Retro-Ease, it's a better way to re-roof!
Better Than Wood:
Eliminates tear-off . Cost comparable to 1" x 4" wood . Faster, easier, safer . Won't
crease the metal like wood . Increase profitability . Lightweight . Won't rot or warp
. Won't corrode the metal
PermaFelt
Synthetic Roof Underlayment
7X LIGHTER
20X STRONGER
5X MORE COVERAGE
SLIP RESISTANT
EASIER INSTALLATION
UV RESISTANT
35 lbs. Per Roll
48” x 250’(10 Squares)
Preprinted lap lines & fastening points
|
